Tag Archives: Winter

Fallstreak holes over Missouri


Fallstreak Hole, Contrail, Altostratus (Karl Kischel, Williamsburg, Missouri, 18 Feb 2016)

Hole punch clouds have fascinated sky watchers, scientists, and pilots since the 1940s. Nearly circular in appearance, the hole punch cloud can have streams of ice falling from its center (as in Karl’s picture), thereby giving a subset of these clouds the name fallstreak holes. These beautiful, fascinating atmospheric phenomena are created by aircraft penetrating cloud layer. In Williamsburg, it’s not unlikely to see planes ascending and descending due to the nearby busy St. Louis airport.

Fallstreak holes require a specific cloud type: mid-level altostratus or altocumulus clouds that exist between 6,500 and 20,000 ft above ground. At these altitudes, temperatures are well below freezing, but water droplets exist in liquid form at these sub-freezing temperatures, called supercooled water. To freeze, liquid water droplets need either a nucleus to freeze upon (either ice itself or a particle in the air such as dust, bacteria, fungal spores, volcanic ask, etc.) or temperatures to be below -40 degrees C to freeze spontaneously without a nucleus.

So how does an aircraft flying through supercooled water lead to freezing of drops and ultimately a fallstreak hole?  We know that when aircraft fly high in the sky, at very cold temperatures (i.e., below -40 degree C), the water vapor in the jet engine exhaust rapidly freezes to form contrails across the sky, as can be seen in the photo above. But the key for fallstreak holes is the localized cooling that’s created around propellors and wings. Propellors push air outwards, causing the air to expand, which lowers the pressure and therefore cools the air. For jets, lower pressure exists above the wing compare to below, again leading to localized cooling of the air. This can cool the air to temperatures below -40 degree C, even when the aircraft is flying at lower temperatures, causing the supercooled water droplets in the cloud layer to spontaneously freeze where the aircraft passes through.

These ice crystals begin to grow at the expense of the nearby supercooled droplets, referred to as the Bergeron-Findeisen process. The vapor left behind by the evaporated supercooled droplet deposits onto the ice crystals thereby, along with the remaining supercooled droplets freezing on impact, allowing the ice crystals to grow.


Drawing representing the Bergeron-Findeisen process: Ice crystals growing at the expense of water droplets


The freezing processes gives off heat, warming the surrounding environment.



This warmer air rises, cools, and creates small circulations where downward (subsiding) air compensates for the locally rising air where the ice crystals are growing. The subsiding air warms, creating the hole.

Screen Shot 2016-02-21 at 8.08.06 PM

Computer simulations of a hole punch cloud showing heating (red), cooling (blue), and the corresponding circulations (black arrows). From Muraki et al. (2015).


These holes can spread for hours, lasting more than 4 hours at times, and the ice crystals can grow so large that they start to fall as snow, leading to the name fallstreak hole.


Zoomed in view of the hole punch cloud showing the fall streaks (Karl Kischel, Missouri, 18 Feb 2016)


On 18 February 2016, Karl was lucky enough to photograph two of these hole punch clouds over Williamsburg, Missouri.


Two fallstreak holes, Karl Kischel, Williamsburg, Missouri


These fallstreak holes could also be seen on visible satellite imagery! Those in the circle are the same ones Karl was photographing. Notice there’s a third one nearby. In fact, because these are visible from satellites, scientists have used high-resolution satellite data to look at the occurrence of fallstreak holes around major airports in the U.S. They found that they occur 3-5% of the time on average per year, and about 15% of the time during the winter (when we’re most likely to see these altocumulus/altostratus cloud layers).


GOES Visible Satellite image from 15:15 UTC on 18 February 2016 showing the fallstreak holes.

Besides wanting to know your chances of seeing these beautiful hole punch clouds in the sky, why is it important to know how often they occur? There’s an argument that the increased snow that falls from the holes could mean more de-icing would be required at the airport before takeoff.

Screen Shot 2016-02-21 at 8.21.42 PM

Computer simulation after 60 minutes from when ice was introduced into the cloud layer. From Heymsfield et al. (2011)


Thanks for the great pictures, Karl! Enjoy additional photos he took from that day.


Contrails, distrails, and cloud shadows

As airplanes have become a dominant mode of travel, the large volume of air traffic leads to a unique cloud formation – contrails.

Contrails, short for Condensation trails, are formed from the condensation of an airplane’s hot exhaust.  An aircraft’s exhaust contains water vapor and tiny particles (in both gas and solid form) that are a result of the combustion process that drives the engine. The particles serve as a condensation nuclei – a particle onto which condensation can occur.  Contrails form high in the atmosphere (usually above 8 km or 4.3 mi) where temperatures well below freezing.  This means that contrails are generally ice clouds.

This cloud type can evaporate quickly or last a very long time depending upon atmospheric conditions.  As a contrail ages is often spreads laterally due to the winds aloft.  It is important to understand contrails because they impact how much of the sun’s incoming rays will be reflected back to space, which can have an impact on climate.  Here’s an example of a couple of contrails in a generally clear sky

Contrails in different directions over the Colorado Front Range.  Photograph by Nick Guy, Dec 30, 2013.

Contrails in different directions over the Colorado Front Range. Photograph by Nick Guy, Dec 30, 2013.

and more persistent contrails in a cloudy sky

A sky chock full of contrails in Northern France.  Photo by Ghislaine Rabin, Nov 9, 2013.

A sky chock full of contrails in Northern France. Photo by Ghislaine Rabin, Nov 9, 2013.

So what happens when a jet flies through an already established cloud?  The heat of the exhaust can actually cause the cloud droplets to evaporate, leaving clear (visually) air in its place.  You can actually see a line in the cloud where the aircraft transited!

A distrail interrupts this cloud in Greeenville, North Carolina.  Photo by Blake Smith, Jul 18, 2014.

A distrail interrupts this cloud in Greeneville, North Carolina. Photo by Blake Smith, Jul 18, 2014.

If a cloud layer forms below the contrail and the sun is behind the contrail from your perspective the contrail can cast a shadow onto the lower cloud deck.  Don’t confuse this with a distrail.  Here’s an example, notice the contrails visible through the thin cloud layer and the dark paths are the projected shadow.

Contrails above cast shadows onto a lower cloud layer. Photo by Nick Parazoo, Grand Canyon, Arizona, Jul 4, 2014.

Contrails above cast shadows onto a lower cloud layer. Photo by Nick Parazoo, Grand Canyon, Arizona, Jul 4, 2014.

NASA has put together an informational page and a  nice presentation detailing the conditions needed to produce contrails.


While on a flight from Seattle to Portland, we flew closely above a stratocumulus cloud deck. Upon landing in Portland, I could then look up at these patchy, lumpy clouds. Stratus means layer and cumulus means heap so it’s no surprise this name is given to the group of clouds that typically form in patches with the individual clouds low enough to the surface that they appear larger than the altocumulus clouds, but still have some vertical growth. You can clearly see these features in these above and below views!

Angela Rowe
Location: Flight to Portland, Oregon from Seattle, Washington
Date: February 2014

Stratocumulus_above_AngelaRowe_Portland_Feb2014 Stratocumulus_below_AngelaRowe_PortlandOR_Feb2014

This is an example of Altocumulus stratiformis translucidus. Wow, that’s a mouthful! Let’s break it down a bit. Altocumulus are mid-level patches of clouds (cloudlets), existing between 6500 and 20,000 ft, that are mostly made of water droplets. They indicate some instability at that level. Stratiformis is its species because they are spread out over a large area. Note how they are different from the layered altostratus clouds because you can still make out the individual cloudlets. The variety Translucidus means that you the clouds are thin enough to see the sun through. If these were to continue to spread out and thicken to altostratus, it would be an indication of more inclement weather to come.

Angela Rowe
Location: Oahu
Date: February 2011


“Nimbo” refers to rain and “stratus” is a layer so this low-level cloud layer lightly rains and casts a gray ceiling overhead. This picture was taken in Seattle where this is a common sight throughout especially the winter. You can’t really tell that it’s raining from this picture because the raindrops are very small. Light, consistent rain is the norm from this featureless cloud.

Angela Rowe
Location: Seattle, Washington
Date: March 2014